رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Vehicular Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Between 1.250 inches and 1.255 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.999 inches and 2.002 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
3.436 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
1.688 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
21
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.433 inches
First Center To Center Distance Between Mounting Holes:
1.750 inches
Second Center To Center Distance Between Mounting Holes:
1.686 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-136-8744
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
Between 3.138 inches and 3.158 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.4991 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.AGMD
Flange Style:
E1
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.433 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.940 inches
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.440 inches
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
Between 4.278 inches and 4.298 inches
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Involute
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Bearing Recess/keyway Depth:
Between 0.150 inches and 0.450 inches
Distance From Flange To Yoke:
Between 1.430 inches and 1.440 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
