رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
With single layer copper wire braid shield 6.00 in long
TXT
وصف:
Electrical Plug Connector Body
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Angle shape, w/o cable clamp
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
1.281 inches
MRC:
The angle the end/s/ or legs deviate from the centerline of the inlet end,expressed in degrees.ADMW
Body Angle In Deg:
45.0
MRC:
Indicates the type of threaded device included on the item.AFQR
Threaded Device Type:
Coupling facility
MRC:
The number of mating ends provided with the item which are designed to accommodate another connector.AFQW
Mating End Quantity:
1
Distance From Centerline To Connector End:
Between 1.450 inches and 1.638 inches
Distance From Centerline To Cable End:
Between 0.450 inches and 0.638 inches
MRC:
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AKMG
Thread Length:
6.3 millimeters
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
25.0 millimeters
MRC:
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.CQQR
Thread Pitch In Millimeters:
1.00
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
19207-12324398-17 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Iso m
