رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two holes located along centerline; all holes countersunk, 0.435 in. Min and 0.445 in. Maximum diameter through 0.765 in. Min and 0.797 maximum diameter at 82.0 degrees angle
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 13.940 inches and 14.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 27.250 inches and 27.370 inches
Hole Quantity Along Length:
12
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
4.125 inches
Distance Between Holes Along Width:
4.500 inches
Distance From First Hole Centerline To End Along Length:
3.031 inches
Distance From First Hole Centerline To End Along Width:
2.500 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.237 inches and 0.263 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 or aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t651 federal specification 1st material response or qq-a-250/8, h34 federal specification 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-22750 military specification single treatment response
