رقم الجزء 123Z-36

Vernier Caliper
وصف

Caliper has 0 to 36 outside and inside ranges. Graduations: 0.001. Caliper consists of beam frame with integral fixed jaw, sliding jaw with vernier scale, adjustment screw and fine adjustment clamp. Main scales are located on front and back of beam. For

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 2663.726 and 3483.334 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
123z-36
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
002224565
NSN
رقم المخزون الوطني:
5210-00-222-4565 5210002224565
TXT
وصف:
Vernier Caliper
INC
INC
رمز اسم العنصر:
11306
MRC:
An indication of whether or not a container from which the item is completely removable in normal operable condition is provided.AFJU
Carrying Case:
Provided
MRC:
The smallest increment of measure represented by the marking/s/ on a vernier.BCTQ
Minimum Vernier Graduation Unit:
0.001 inches
MRC:
An indication of the measuring system used with the item.BDLS
Measurement System:
English
MRC:
A measurement between specified points on the jaw,in distinction from height.BJXP
Jaw Depth:
2.750 inches
MRC:
The minimum and maximum limits of the outside measurement.CKJR
Outside Measurement Range:
+0.000/+36.000 inches
MRC:
The minimum and maximum limits of the inside measurement.CKJS
Inside Measurement Range:
+0.000/+36.000 inches
MRC:
Indicates the location at which the vernier scale is to be used.CKJW
Vernier Scale Usage Location:
Inside and outside
MRC:
Indicates the location of the vernier scale on the item.CKJX
Vernier Scale Location:
Front and back
MRC:
An indication of whether or not a fine adjustment feature is included.CKJY
Fine Adjustment Feature:
Included
MRC:
An indication of whether or not an additional integral jaw set is included.CKJZ
Additional Integral Jaw Set:
Not included
MRC:
An indication of whether or not an integral depth gage is included.CKKC
Integral Depth Gage:
Not included
MRC:
A measurement taken at right angles to the length of the nib in a closed position,in distinction from thickness.CKKL
Nib Closed Position Width:
0.500 inches
MRC:
The means used to read the inside measurement.CNLM
Inside Measurement Reading Method:
Direct reading

{lang[cimilar]} Vernier Calipers

« Craftsmen's Measuring Tools {lang[catalog]}
قارن الآن»
واضح | أخفى