رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
124-4322619pc30
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.625 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
3.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft carrier, cvan 68, hatches-ballistic spring and hinge arms
MRC:
A measurement of the longest dimension of the hub,in distinction from width.AJLJ
Hub Length:
0.500 inches
MRC:
The length of a straight line which passes through the center of the hub,and terminates at the outside circumference.ALNC
Hub Outside Diameter:
1.375 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Brass, qq-b-621, class a-canceled
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Zinc, qq-z-325, type 2, class 2
MRC:
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AWDP
Thread Diameter:
0.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the handwheel.AWJX
Handwheel Style:
Disk
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive facility.AWJY
Drive Facility Style:
Round
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a given diameter of the drive facility.AWJZ
Drive Facility Thread Series Designator:
Unc
MRC:
An indication of whether or not a handle rotating feature is included.AWKD
Handle Rotating Feature:
Not included
MRC:
An indication of whether or not a weight is included to offset the weight of the handle.AWKE
Handle Counterbalancing Weight:
Not included
MRC:
An indication of whether or not a ratchet is included.AWKF
Ratchet:
Not included
MRC:
A numeric-alpha designator indicating the pitch-diameter tolerance and the external or internal location of the thread.CFHL
Thread Class:
2b
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
11
