رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Has 0.190-32 unf-2b threaded holes- csk 0.190 diameter x 120 degrees both sides-4 places at 15 degrees angle either side keyway; used on peacekeeper t7h
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.3700 inches and 2.3800 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 11.5010 inches and 11.5030 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 10.5010 inches and 10.5030 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered all corners
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches inside diameter surface of body
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.5070 inches and 0.5170 inches internal keyway length
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.8760 inches internal keyway width
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
2.3700 inches and 2.3800 inches internal keyway depth
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 4880 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
17c solid, plain, no outside flanges
