رقم الجزء 12470556

Headless Grooved Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 1384.3 and 1868.805 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
12470556
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014672428

معلومات الجزء
length 4.08 inches ly; first end length 1.12 inches ly; groove width 0.062 inches ly; first end width, 0.562 inches ly; second end diameter, 0.5000 inches ly; hole diameter 0.188 inches ly; all edges and corners shall be free from burrs and sharp endges; heat treat per mil-h-6875, condition h1075; finish 5.4.1 of mil-std-171; clean and passivate

NSN
رقم المخزون الوطني:
5315-01-467-2428 5315014672428
TXT
وصف:
Headless Grooved Pin
INC
INC
رمز اسم العنصر:
02386
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered w/thru hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
Between 0.188 inches and 0.190 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.300 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
End item 014553174, striker, xm707
MRC:
None.AMCS
First End Taper Length:
0.120 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.560 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Chamfered end
MRC:
None.CRMG
First End Taper Angle:
Between 40.0 degrees and 50.0 degrees
MRC:
None.CSGL
Second End Tip Radius:
0.1875 inches
MRC:
None.CTHC
Second End Taper Angle:
60.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5643, cond.A assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response and mil-std-171 military standard single treatment response

{lang[cimilar]} Headless Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى