رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
This item is the exact opposite of p/n 12478972-3; 2nd "hole" on 1st leg is actually aa slot 0.375 in (along width) by 0.50 in (along length) and centered 0.38 in from edge along length; finish: color is 383 green, chip no. 34094 of fed-std-595; omit prime and paint from holes; dimensiona; limits and surface texture apply without coating
TXT
وصف:
Double Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.910 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-01-455-3174
Second Leg Width:
Between 4.190 inches and 4.310 inches
Second Leg End Width:
Between 3.690 inches and 3.810 inches
First Leg Hole Diameter:
Between 0.374 inches and 0.385 inches
Second Leg Hole Diameter:
Between 0.195 inches and 0.206 inches
Second Leg Distance Between Hole Centers Along Width:
1.275 inches
Second Leg Distance From Edge To Hole Center Along Width:
2.350 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.500 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.125 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.125 inches
Center Section Height:
Between 1.450 inches and 1.850 inches
Center Section Width:
Between 4.190 inches and 4.310 inches
Center Section Thickness:
0.125 inches
First Leg Width:
Between 4.190 inches and 4.310 inches
First Leg Distance Between Hole Centers Along Width:
1.560 inches
First Leg Distance From Edge To Hole Center Along Width:
1.940 inches
First Leg Distance From Edge To Hole Center Along Length:
0.313 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
0.13 radians
Second Leg Angle:
0.13 radians
Second Leg Chamfer Angle:
Between 45.0 degrees and 50.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b209m national specification all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate and primer epoxy and plastic polyurethane
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 military standard 1st treatment response and fed-std-595 federal standard 2nd treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
