رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Reinforcing plate, curbside
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
302.0 millimeters
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.375 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
343.0 millimeters
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
13.4 millimeters first hole and 14.0 millimeters first hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
13.4 millimeters fourth hole and 14.0 millimeters fourth hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
13.4 millimeters second hole and 14.0 millimeters second hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
13.4 millimeters third hole and 14.0 millimeters third hole
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
17.5 millimeters fifth hole and 17.9 millimeters fifth hole
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
14
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2320-01-552-7782 truck, dump
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Holes 6 through 14 all have the same diameter of hole 5, 17.5-17.9 min-max millimeters dia
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a572/a572m, grade 80 assn standard single material response or astm a656/a656m, grade 80 assn standard single material response
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular w/rounded corners
