رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Has 4 welding pads located in diamond formation on leg 2; welding pads are 1.0 inches in diameter and 0.63 inches in height; has 2 rubber pads mounted on top and bottom positioned welding pads of diamond formation; rubber pads are 0.75 inches in diameter and 0.1875 inches in height
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 2.260 inches and 2.320 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 5.900 inches and 5.960 inches
Second Leg Width:
Between 6.720 inches and 6.780 inches
Second Leg End Width:
Between 4.720 inches and 4.780 inches
First Leg Slot Length:
Between 0.670 inches and 0.730 inches
First Leg Slot Width:
Between 0.433 inches and 0.443 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 4.765 inches and 4.825 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 4.415 inches and 4.475 inches
Second Leg Slot Length:
Between 0.670 inches and 0.730 inches
Second Leg Slot Width:
Between 0.433 inches and 0.443 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.188 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.660 inches and 0.720 inches
First Leg Distance From Edge To Hole Center Along Width:
1.955 inches
First Leg Distance From Edge To Hole Center Along Length:
1.565 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One slot
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
Between 0.330 radians and 0.390 radians
Second Leg Chamfer Angle:
Between 0.970 radians and 1.030 radians
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel and rubber neoprene
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a 514 assn standard single material response and astm a 36 assn standard single material response and astm d 2000 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
