رقم الجزء 12538729

Nonmetallic Strip Seal

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 28.54 and 38.529 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
12538729
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
015877636

معلومات الجزء
Seal, manifold

NSN
رقم المخزون الوطني:
5330-01-587-7636 5330015877636
TXT
وصف:
Nonmetallic Strip Seal
INC
INC
رمز اسم العنصر:
36874
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.250 inches
MRC:
None.ADPW
Outside Corner Radius:
0.880 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
5.370 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
17.490 inches
MRC:
None.ADUG
Outside Corner Bevel Length:
0.630 inches
MRC:
None.ADUH
Inside Corner Bevel Length:
0.250 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
6.630 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.313 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Rg-33 mrap
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
18.750 in long; 0.06 lbs; material: pressure sensitive adhesive; construction: double sided rubber based tape compatible with silicone; release film, polyester; total tape thickness: 0.0034 in; 90 degree peel strength @ 77f; 10 lb/in min; temp resistance up to 180 degrees f
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular

{lang[cimilar]} Nonmetallic Strip Seals

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى