رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One groove, 0.172 in. Min and 0.192 in. Maximum wide by 0.103 in. Min and 0.113 in. Maximum deep, 6.074 in. Min and 6.084 in. Maximum w by 6.886 in. Min and 6.896 in. Maximum lg
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.279 inches and 0.291 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
7.562 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.375 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.250 inches
Hole Quantity Along Length:
2
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
3.875 inches
Distance Between Holes Along Width:
3.469 inches
Distance From First Hole Centerline To End Along Length:
0.312 inches
Distance From First Hole Centerline To End Along Width:
0.312 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.250 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Tt-e-490 federal specification single treatment response
