رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Aluminum surfaces anodized per mil-a-8625, type 2
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.278 inches and 0.287 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.660 inches and 0.680 inches
Outside Corner Radius:
Between 0.300 inches and 0.320 inches
Side Radius From Gasket Center:
Between 0.680 inches and 0.700 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.106 inches and 0.140 inches
Gage Ring Thickness:
Between 0.070 inches and 0.090 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
3
MRC:
The percentage the item will stretch.ANYN
Elongation Percentage:
120
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
75.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 and rubber fluorocarbon class fpm
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 4027 assn standard 1st material response and mil-r-83485 military specification 2nd material response or a50tf193 cl a, fscm 07482 mfr ref 2nd material response
