رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
1276-19-181-01-00
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
4.8 millimeters
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
65.0 millimeters
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
22.0 millimeters
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.4 millimeters
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
16.0 millimeters
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
42.0 millimeters
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
12.0 millimeters
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
55.0 millimeters
Outside Edge To Bolt Hole Center Distance Along Width:
5.0 millimeters
Outside Edge To Bolt Hole Center Distance Along Length:
5.0 millimeters
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.7 millimeters and 0.9 millimeters
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
55.0 shore durometer a and 65.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyamide and rubber synthetic or rubber chloroprene class cr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-c-8068 military specification 1st material response and mil-c-8068 military specification 2nd material response or fairprene 22-002, fscm 90227 mfr ref 1st material response and fairprene 22-002, fscm 90227 mfr ref 2nd material response or reeves cote 7220, fscm 86732 mfr ref 1st material response and reeves cote 7220, fscm 86732 mfr ref 2nd material response or 417, sc715abc1e3f1z military standard 3rd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
