رقم الجزء 1284M82G05

Aircraft Turbine Shroud Segment

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 392.8 and 530.28 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
1284m82g05
تجريد:
Yes - DEMIL/MLI
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
012006464

معلومات الجزء
Outer radius 2nd end 11.908 in.; inner radius 1st end 11.393 in.; inner radius 2nd end 11.14 in.; formed shape 45 deg. 57 min. 27 sec.; 11 holes 0.3535 in. Dia. Counterbore 0.520 in. Dia. W/2 cutter run outs per ea hole

NSN
رقم المخزون الوطني:
2840-01-200-6464 2840012006464
TXT
وصف:
Aircraft Turbine Shroud Segment
INC
INC
رمز اسم العنصر:
50603
INC
COM
امتثال:
* ITAR Controlled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.233 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.890 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F110 aircraft engine
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
Indicates the location of the item on the engine section.CZBJ
Engine Section Location:
Compressor
MRC:
The number value that reflects the stage where the item is used.CZCJ
Stage Number:
2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2618
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4132 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize

{lang[cimilar]} Aircraft Turbine Shroud Segments

« Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components {lang[catalog]}
قارن الآن»
واضح | أخفى