رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Color green
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
39.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.500 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
4.425 inches
Outside Edge To Bolt Hole Center Distance Along Length:
1.800 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.250 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
9
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5456 or aluminum alloy 6061 or aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/7, h111 or h112 federal specification 1st material response or astm b221, h111 or h112 assn standard 1st material response or qq-a-200/8, t6 or t6510 or t6511 federal specification 2nd material response or qq-a-225/8, t6 or t651 federal specification 2nd material response or astm b221, t6 or t651 or t6510 or t6511 assn standard 2nd material response or qq-a-200/4, h111 or h112 federal specification 3rd material response or qq-a-200/5, h111 or h112 federal specification 3rd material response or astm b221, alloy 5083, h111 or h112 assn standard 3rd material response or astm b221, alloy 5086, h111 or h112 assn standard 3rd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-46168 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/square corners
