رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Three plate nuts riveted on, three holes 0.337 in. Min and 0.351 in. Maximum diameter on center section
TXT
وصف:
Double Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: missile, air launch cruise (alcm) agm-86b; engine, aircraft, f110-ge-100/129 (f-16 c/d)
First Leg Hole Diameter:
Between 0.274 inches and 0.288 inches
Second Leg Hole Diameter:
Between 0.274 inches and 0.288 inches
Second Leg Distance Between Hole Centers Along Width:
0.749 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.060 inches and 0.066 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.060 inches and 0.066 inches
Center Section Thickness:
Between 0.060 inches and 0.066 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Nut
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
Between 89.0 degrees and 91.0 degrees
Second Leg Angle:
Between 89.0 degrees and 91.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 625
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5599 assn standard single material response
