رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
5.688 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
10.000 inches
MRC:
The value,or range of values,of direct current potential for which the item is rated.ACYR
Dc Voltage Rating:
12.0 volts
MRC:
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.ADTV
Case Material:
Plastic
MRC:
The name assigned to the item by the joint electronics type designation system.AKWA
Joint Electronics Type Designation System Item Name:
Telephone set
MRC:
The type number assigned to the item by the joint electronics type designation system.AKWB
Joint Electronics Type Designation System Item Type Number:
Ta-1006/gcc-21a
MRC:
The relationship of the electrical power source to the item.AKWC
Electrical Power Source Relationship:
Operating
MRC:
An indication of whether or not a facility/ies/ to accommodate a battery/ies/ is included.ALSF
Internal Battery Accommodation:
Not included
MRC:
An indication of the source of the current utilized by the transmitter.ANPX
Transmitter Current Supply Source:
Local battery
MRC:
The device used to signal incoming calls.ANPY
Incoming Call Signal Device:
Buzzer
MRC:
Indicates the location of the signaling device.ANQA
Signal Device Location:
Base
MRC:
The device used to signal outgoing calls.ANQB
Outgoing Call Signal Device:
Button switch
MRC:
An indication of whether or not a dial is included.ANZH
Dial:
Included
MRC:
An indication of whether or not the inclosure is furnished with a locking facility/ies/.ANZN
Inclosure Locking Facility:
Not furnished
MRC:
The number of buttons on the item for circuit control.ANZR
Circuit Control Button Quantity:
6
MRC:
An indication of whether or not a push-to-talk switch is included.ANZS
Push-to-talk Switch:
Included
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Dial operated, with buttons for special functions
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
56657-daab07-79-g-6212/0001, qci 10.25 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
