رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Material per approved suppliers recommendation except cure pressure to be 50 to 100 psi; 45 degree chamfer on upper rt corner of 0.16 to 0.20
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
130 pounds per square inch
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 71.000 inches and 71.500 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.590 inches and 0.610 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
Between 0.360 inches and 0.380 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nha 9524m27g04; f101-102 jet eng
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Silicone rubber
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q
