رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Torsion Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.973 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Straight bend end (left) first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Straight bend end (right) second end
Spring Free Length:
1.490 inches
Center Section Width:
Between 1.430 inches and 1.510 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
5-1/2
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
Spring Free Outside Diameter:
1.173 inches
Coil Axis To Center Section Distance:
Between 2.143 inches and 2.377 inches
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
End w/lh helix of coil angled to center section and end w/rh helix of coil angled to center section
End Length:
2.143 inches both ends and 2.377 inches both ends
End Length From First Bend To Second Bend Or End:
0.550 inches second end
End Length From First Bend To Second Bend Or End:
0.960 inches first end
MRC:
The preformed shape of the middle section of the item.CXWF
Center Style:
Square type
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns k08500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-470 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 finish no. 5.3.1.2 or 5.3.2.2 military standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single torsion right hand
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Loop off-centered with an inside dia. Of 0.202 in. Min. And 0.266 in. Max. An outside dia. Of 0.434 in.
