رقم الجزء 14-40043-11

Headed Shoulder Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 92.48 and 124.848 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
14-40043-11
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
010940478

معلومات الجزء
Shoulder has two wrenching flats 0.260 in. Across flats

NSN
رقم المخزون الوطني:
5315-01-094-0478 5315010940478
TXT
وصف:
Headed Shoulder Pin
INC
INC
رمز اسم العنصر:
16563
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats
MRC:
None.ABPB
Under Head Length:
Between 1.335 inches and 1.345 inches
MRC:
None.ABPR
First Step Diameter:
0.352 inches
MRC:
None.ABPS
First Step Length:
0.310 inches
MRC:
None.ABPT
Second Step Diameter:
Between 0.2470 inches and 0.2485 inches
MRC:
None.ABPU
Second Step Length:
Between 1.025 inches and 1.035 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.052 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.220 inches
MRC:
None.AMCS
First End Taper Length:
0.050 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.428 inches and 0.448 inches
MRC:
None.CRMG
First End Taper Angle:
30.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
0.750 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Csym
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shank end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.080 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder

{lang[cimilar]} Headed Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى