رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Second hole on second leg 0.551 min and 0.559 maximum diameter
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.750 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
4.240 inches
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Gusset center section
First Leg Hole Diameter:
Between 0.391 inches and 0.406 inches
Second Leg Hole Diameter:
Between 1.005 inches and 1.010 inches
Second Leg Distance Between Hole Centers Along Length:
1.000 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.800 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.800 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.139 inches and 0.155 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.139 inches and 0.155 inches
First Leg Width:
3.180 inches
First Leg Distance Between Upper Hole Centers Along Width:
1.000 inches
First Leg Distance Between Hole Centers Along Length:
1.340 inches
First Leg Distance From Edge To Hole Center Along Width:
0.910 inches
First Leg Distance From Edge To Hole Center Along Length:
0.280 inches
Second Leg End Radius:
0.800 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1008 or steel comp 1010
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae assn standard all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
