رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Two 0.125 in. Diameter and one 0.086 in. Diameter threaded holes on cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.125 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.530 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.080 inches
Hole Quantity Along Length:
4
Hole Quantity Along Width:
2
Distance Between Holes Along Length:
1.000 inches
Distance Between Hole Centerline And First Hole Along Length:
0.430 inches
Distance Between Hole Centerline And First Hole Along Width:
0.855 inches
Distance From First Hole Centerline To End Along Length:
0.540 inches
Distance From First Hole Centerline To End Along Width:
0.965 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.240 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.063 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6625-01-144-4481 test set, radio
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061