رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The number of threads per inch on the mounting.AAMQ
Mounting Threads Per Inch:
32
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.297 inches
MRC:
The length of a straight line which passes through the center of a bushing,and terminates at the circumference.ABKH
Bushing Diameter:
0.375 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.875 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.516 inches
MRC:
A measurement of the longest dimension of a bushing,in distinction from width.ABXD
Bushing Length:
0.250 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 0.219 inches and 0.250 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Bushing
MRC:
The number of indexed positions to which the switch actuator may be moved.AFTM
Switch Position Quantity:
6
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/upm-6a and an upm-6b
MRC:
The length of a straight line which passes through the center of a shaft cross hole, and terminates at the circumference.AKJK
Err Default:
Err default and err default
MRC:
The length of a straight line which passes through the center of a shaft cross hole, and terminates at the circumference.AKJK
Shaft Cross Hole Diameter:
Between 0.156 inches and 0.203 inches
MRC:
An indication of whether or not a locking device is included.AMDA
Locking Device:
Included
MRC:
An indication of whether or not the stop is adjustable.APDN
Stop Adjustability:
Adjustable
MRC:
The geometric configuration of the shaft end,when viewed axially,and its location.APDQ
Shaft Cross-sectional Shape And Location:
Round front end
MRC:
A measurement,such as length,width,diameter,and the like.APDR
Size:
0.250 in. Diameter front end
MRC:
The distance from the end of the shaft to the mounting surface.APDS
Distance From Shaft End To Mounting Surface:
0.734 inches
MRC:
A measurement of the longest dimension of the shaft tip, in distinction from width.CTBP
Shaft Tip Length:
0.062 inches
