رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Cadmium-plated qq-p-416, type 1, class 3 on groove surface 0.250 in. Min, 0.285 in. Maximum from head end
TXT
وصف:
Fluid Passage Bolt
Concentric Hole Depth:
Between 0.670 inches and 0.690 inches
Concentric Hole Diameter:
Between 0.212 inches and 0.218 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.995 inches and 1.035 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACLT
Second End Style Designator:
Flared
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.061 inches and 0.066 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.990 inches and 1.010 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.195 inches and 0.240 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
Between 0.075 inches and 0.115 inches
First Diameter From Wrenching Feature:
Between 0.758 inches and 0.760 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.150 inches and 0.170 inches
First Radial Fluid Hole Diameter:
Between 0.155 inches and 0.161 inches
Second Radial Fluid Hole Diameter:
Between 0.155 inches and 0.161 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 0.570 inches and 0.610 inches
Distance From Second Radial Hole Center To End Of Bolt:
Between 0.570 inches and 0.610 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
Between 0.820 inches and 0.840 inches
Wrenching Feature Height:
Between 0.175 inches and 0.195 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 38.0 rockwell c and 42.0 rockwell c
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
16
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.750 inches
MRC:
The angle of the end surface upon which the mated surface seats.CRCN
Second End Seat Angle:
60.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5000 military specification single material response or mil-s-6758 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-16232, type m, class 2 military specification single treatment response
