رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
W/0.092 in. Min 0.097 in. Maximum diameter hole drilled in head 1.280 in. Nom dp and counterbore w/0.250-28 unf 2b thd 0.250 in. Nom dp; make from ms20392-5c73
TXT
وصف:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2 (r1 not required in item description)
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.078 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.371 inches and 0.373 inches
Under Head Length:
2.469 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
Between 0.096 inches and 0.116 inches
Second Hole Diameter:
Between 0.077 inches and 0.082 inches
Distance From Centerline Of Hole To End Of Pin:
0.135 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
1.411 inches
Pin Chamfer Angle:
15.0 degrees
Pin Head Diameter:
0.500 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.062 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4037 or steel comp 4130 or steel comp 8630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi assn standard all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 ty2 cl2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
