رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Shaft, fan drive
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Flat grooved
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Flat keyways and internally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
23.0000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
REFR-IG-ERA-TION
First End Distance From End To Flat:
0.2775 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.4990 inches and 0.5000 inches
First End Grooved Flat Length:
0.6250 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.1890 inches and 0.1900 inches
Second End External Keyway Length:
1.3800 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
Between 0.1070 inches and 0.1130 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.6240 inches and 0.6250 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
0.7500 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.9980 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
First end has an arbor center and 2 flats, steps up at 1.0900 inches; second end internaly threaded 0.3125-24 unf, 0.3440 wide x 0.6250 long flat 0.7550 inches from end steps up at 1.3800 inches; axle has three flats at 5.0000 inches and 11.5000 inches on center spaced 120 degrees; also 0.2520/0.2510 x 0.1480/0.1420 deep x 2.5000 useable length keyway 8.2500 inches on center from second end, end configuration of keyway optional
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, class 304, cond a federal specification single material response
