رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
High speed spring
TXT
وصف:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.028 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E1 spring end, ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, ground both ends
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Allison jet engines&compts t-56
Spring Free Length:
1.156 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
Between 0.790 inches and 0.800 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
4a
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
34.500 pounds
Spring Solid Length:
0.530 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand
Spring Free Outside Diameter:
1.272 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
Between 0.740 inches and 0.760 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
S-316, spring wire mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Additonal load of 8.5 lbs shall give additional compression of 0.095 in.Min. To 0.105 in. Max. Do not exceed 43 lb load when testing. Noraml stress at 43 lb load is 76.641 psi. Corrected stress at load is 88.050 psi.
