رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Lpd-17 sideport ramp and shell doors aft panel j-box
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
5.130 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
7.270 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
11.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
7.980 inches
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.ACSY
Furnished Items And Quantity:
9 stuffing tubes and packing
MRC:
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.AEBV
Unthreaded Mounting Hole Diameter:
0.410 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.AEBW
Center To Center Distance Between Mounting Facilities Parallel To Height:
3.630 inches
MRC:
A designation of the standard mounting facility arrangement provided.AESL
Standard Mounting Pattern Designator:
3 point-triangular
MRC:
The length of a straight line which passes through the center of the cable entrance,and terminates at the circumference.AFQJ
Cable Entrance Diameter:
Between 1.010 inches and 1.260 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Door assembly
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
Indicates the type and number of terminals for providing electrical connection.CCFF
Terminal Type And Quantity:
20 screw
MRC:
Indicates the type and number of entrances provided.CPLF
Entrance Type And Quantity:
9 prepunched hole
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Box is mil-t-24558/4-432.1 (brass, 20 term, 80 wire); assembly. Includes 4 stuffing tubes on each long side and one stuffing tube on top; also has 4 jumper pieces cut from jumper ring tbj-10 and located on terminal block at 1, 3/ 2, 4/ 17, 19/ 18, 20 (with terminal 1 being on top left)
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular, flush mounting
