رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Filler foam
TXT
وصف:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
25.440 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
29.580 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Missile, minuteman lgm-30
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Roughly rectangular with upper corners cut off at 30 degree angle, 19.40 from bottom; right edge has cutout 1.50wx7.0h, 1.67 inches from bottom; top edge has cutout starting 17.22 from right edge, extending to right edge; left top corner has arched cutout with radius of 2.5 centered 22.22 from right edge & 23.22 from bottom; center area has 3 cutouts: rectangle 1.50wx5.25hx1.50d, 16.97 from right edge & 17.14 from bottom, an arch with radius or 2.75 centered 22.22 from right & 14.39 from bottom then extending 9.50 to the right, a "finger" with radius or 3.0 from bottom edge of arch in 90 degree arc, then straight down with diameter of 3.25 ending with circle centered 10.16 from right edge & 4.39 from bottom; near side is marked "up" & "aft" on 2 lines near center top & with part number below & to the right
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
