رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Filler foam
TXT
وصف:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
18.500 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
25.440 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Missile, minuteman lgm-30
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular with 2 cutouts on bottom/long edge: 2.16wx2.25h at bottom right corner & 2.16wx1.75h at bottom left; 2 cutouts on top edge: beginning 9.32 from either side edge, down 2.50 inches then down & toward side, ending 3.50 from top edge; a kidney shaped cutout with lower arc with 3.00 radius centered 7.72 from left edge & 10.25 from top & upper arc with 3.50 radius centered 12.72 from left edge & 7.75 from top; far side has 3.00 inch deep groove 2.42 inches from right (cut) edge across to the right edge, extending down 5.00 from top edge then slanting toward right, ending at the right edge, 7.25 from top & an arched groove below this cutout, 0.725 inches in from right edge, 2.75wx3.00 deep; near side is marked: "fwd up" at center top & with part number near center of right edge
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
