رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Filler foam
TXT
وصف:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
13.340 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
22.750 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
6irregularly shaped: see drawing for details; near side has 45 degree cut from far surface of top edge to 2.66 from top edge on near surface & markings: "fwd" & "up" on 2 lines in upper left cutout & part number in upper right one; top edge has 2 rectangular cutouts: 2.00wx3.34h, 4.02 & 17.02 from right edge; bottom edge has arched cutout with radius of 2.00 centered 6.46 from right edge & 1.92 from bottom, a lengthwise cuout 7.83ws1.92h, 14.92 from right edge; bottom left & bottom right corners are cut off irregularly; also a roughly t-shaped groove 2.75 deep with leg 14.92 from right on bottom edge of bottom cutout & crossbar slanting 45 degrees from left corner across leg to point 6.46 from right & 5.50 up, then down at 45 degrees to right corner
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
