رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
160d950827-119
معلومات الجزء
Filler foam
TXT
وصف:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
18.200 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
23.400 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangle; 2 cutouts on left/short edge: 1.25wx1.54h, 2.00 from bottom & 1.25wx2.12h, 2.00 from top & cutout on top edge: 3.80wx2.00h, 2.03 from right; near side is tapered 0.32 at top edge and has lengthwise grooves: 2.00hx0.60d along bottom edge & 2.60wx0.70d along top & crosswise groove: 3.80wx3.00h, 2.04 from right edge; a nearly oval cutout with radius of 2.00 centered 13.09 from left with lower arc centered 8.48 from bottom, jutting to left for 1.00 inch 8.48 from bottom, then up to bottom of near side groove, right along groove for 3.00 in. Then down 1.76 to meet top of upper arc, centered 11.84 from bottom, ending with right side of oval; far side is tapered 0.20 at bottom edge and has markings: "up" & "aft" below groove in upper left area dn part number in upper right area (far side up)
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
