رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
160d950827-235
معلومات الجزء
Filler foam
TXT
وصف:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
15.380 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.940 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular with arched cutout on right/short edge: 2.05w, 3.40 from bottom, extending from right edge to left, ending in arc with 2.05 inch radius centered 9.75 from right; bottom edge has cutout: 8.79wx1.16hx0.94d, 6.40 from left; left edge has 3 cutouts: 1.26wx1.40h, 2.20 from top & 1.26wx0.78h, 2.72 from bottom & arched cutout with 2.50 radius centered 6.30 from bottom & 3.30 from left, extending to left edge; near side has lengthwise groove: 2.20wx1.40d along top edge & is marked: "up fwd" in upper left area below groove & with part number in top groove near right edge; far side tapers 0.30 at bottom edge & has semicircular lengthwise groove with 2.00 radius centered 6.88 from bottom edge
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
