رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Sleeve
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
0.075 inches
MRC:
The length of a straight line which passes through the center of the boss,and terminates at the circumference.ADBN
Boss Diameter:
Between 0.276 inches and 0.281 inches
MRC:
The length of a straight line which passes through the center of the boss,and terminates at the circumference.ADBN
Boss Diameter:
0.276 inches and 0.281 inches first end
MRC:
The length of a straight line which passes through the center of the boss,and terminates at the circumference.ADBN
Boss Diameter:
0.276 inches and 0.281 inches second end
Boss Thickness:
0.018 mils
Boss Thickness:
0.021 centimeters
Boss Thickness:
0.032 inches
Boss Thickness:
0.018 inches
Boss Thickness:
0.021 inches base
Boss Thickness:
Unable to decode
MRC:
A measurement of the width across the flats of a nut.AFGH
Nut Width Across Flats:
0.312 inches
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Hexagonal nut
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round boss
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Not rated
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Uns
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
48
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Not rated
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
10.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 360 or copper alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 360 or copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626, 1/2 hard federal specification 1st material response or ecl 88 1/2 hard, fscm 99251 mfr ref 2nd material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626, 1/2 hard federal specification 1st material response or ecl 88 1/2 hard, fscm 99251 mfr ref 2nd material response
