رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, solid
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
26 both ends
MRC:
The means used to attach the item.ABSX
Attachment Method:
Mounting hole
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
9.1667 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
55
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Involute spline both ends
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
3.2500 inches both ends
MRC:
A designation indicating the backlash quality of an item.BDZQ
Backlash Designation:
Grade c
MRC:
The number of mounting hole threads per linear inch measured on a line parallel to the thread axis.CMLM
Mounting Hole Thready Qty Per Inch (tpi):
11 axially through body, first end
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
45.0 rockwell c and 50.0 rockwell c
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Single helix
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Left
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
15.0000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
1.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
4.750 inches second end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
4.750 inches first end
MRC:
The nominal length of a straight line which passes through the center of a bolt hole circle,and terminates at the circumference.CWZN
Bolt Hole Circle Diameter:
6.250 inches axially through body, first end
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flush hub
