رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Ufirst end 0.109 in. Center drill 60 degrees csk to 0.18 in. Dia; heat treat rc32-40; second end bore 0.351 - 0.352 in. Diameter 0.44 in. Dp 60 degrees csk to 0.41 in. Dia; cross drill 4 holes equally spaced; part of input drive assembly 162c9395
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Splined (involute)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Unthreaded cross drilled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.200 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Power unit 131d5023g02 for j85-ge-5/-13 aircraft engine
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.4800 inches
MRC:
A measurement of the longest dimension of the first end spline,in distinction from width.AMDM
First End Spline Length:
0.7200 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
Between 0.4800 inches and 0.4950 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
Between 0.6450 inches and 0.6500 inches
First End Pressure Angle:
30.0 degrees
MRC:
A measurement indicating the diameter-pitch per measurement scale of the first end.AMDS
First End Pitch Diameter:
0.6000 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4700 inches and 0.4705 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1255 inches and 0.1260 inches
Second End Distance From Hole Center To End:
0.2000 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
First End Spline Quantity:
12
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.645 inches and 0.650 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6260 assn standard single material response
