رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain
Concentric Hole Depth:
Between 0.922 inches and 0.952 inches
Concentric Hole Diameter:
Between 0.172 inches and 0.180 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.365 inches and 1.385 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACMR
Second End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.677 inches and 0.697 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
Between 0.434 inches and 0.435 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.851 inches and 0.861 inches
First Radial Fluid Hole Diameter:
Between 0.271 inches and 0.291 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 0.781 inches and 0.811 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
Between 1.177 inches and 1.197 inches
Wrenching Feature Height:
Between 0.163 inches and 0.183 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
6000.000 pounds per square inch
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CRMX
Second End Thready Qty Per Inch (tpi):
20
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CRNB
Second End Thread Size:
0.438 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CRPF
Second End Thread Series Designator:
Unf
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium, mil-t-9047, comp 6
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6931 assn standard 1st material response and ams 4928q assn standard 2nd material response
