رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Rectangular shaped w/two slotted holes on opposite sides
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.140 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.500 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
0.520 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.240 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.250 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
20 and 1
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.002 inches and 0.032 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Separable
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-766 federal specification single material response or mil-s-5059 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/bolt holes
