رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
U/o manifold assembly
TXT
وصف:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
1.988 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
1.180 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
18.0 absolute and 5.0
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outside in
MRC:
The amount of surface area of the filtering material through which the fluid flows.ADNL
Filtering Surface Area:
3.3 square feet
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
102.0 pounds per square inch
MRC:
The length of a straight line which passes through the center of the wire,and terminates at the circumference.AGCW
Wire Diameter:
0.001 inches
MRC:
A numeric value which represents the number of openings per lineal inch.AKSX
Mesh Size:
325.0
MRC:
Indicates the design type of the item.APGF
Design Type:
Limited
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -32.0 degrees fahrenheit and 180.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
2.530 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Mesh single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304 body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi 304 assn standard single material response body
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air and nitrogen, gaseous
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/out container
