رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
Between 0.1865 inches and 0.1875 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
15
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Plain both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
28.0 rockwell c and 32.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
0.211 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
0.210 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Straight
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
25.0000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
14.0361 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.101 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.077 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.069 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain second end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
0.125 inches second end
MRC:
The quality designation of an item as determined by industry,association,or manufacturer standards.CWWK
Precision Classification:
Quality number 11 or quality number 11
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764, type 416se, cond a-canceled federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Peripheral face, back hub protruding
