رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
4.500 in. L x 1.000 in. Diameter end with 0.312 in. W x 0.188 in. D x 4.000 in. L keyway; nut included-dwg no. 179496 1/4
TXT
وصف:
Externally Relieved Body Screw
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Left-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
6.500 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
21.750 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
1.000 inches
First Diameter From Head:
1.490 inches
Second Diameter From Head:
2.000 inches
Third Diameter From Head:
1.730 inches
Fourth Diameter From Head:
2.000 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
2.505 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
10.255 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
11.005 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
17.505 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
W/o internal drive
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
2.000 inches
MRC:
The minimum and maximum pitch diameter limits of a nonstandard straight screw thread.CFSG
Nonstandard Thread Pitch Diameter:
+1.8402/+1.8637 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
4
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Acme
