رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Knob, clutch throttle module
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.305 inches and 0.307 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.427 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.485 inches and 0.490 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
Between 1.177 inches and 1.197 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.745 inches and 0.755 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Straight
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
Between 1.677 inches and 1.697 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style:
Counterbored
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.120 inches and 1.130 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Hole
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.235 inches and 0.265 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, airlifter c-17a
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Opaque
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material is ams qq-a-225/9, temp t7351, shaft hole is 0.508 -0.515 starting at flang end for 0.678 - 0.698; chromic acid and seal per dps 11.01-3; prime and dn7803 lusterluss black polyurethane coat per dps 4.50-165
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black, lusterless
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
