رقم الجزء 17P2D4111-501

T Bracket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 1450 and 1957.5 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
17p2d4111-501
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014767793

معلومات الجزء
Base plate is curved, with 2 slots on each side; center leg consists of two parallel 0.080 in. Thick plates spaced 0.125 in. Apart, with a square hole through each

NSN
رقم المخزون الوطني:
5340-01-476-7793 5340014767793
TXT
وصف:
T Bracket
INC
INC
رمز اسم العنصر:
41080
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.920 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.470 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.000 inches
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the smallest dimension of a base,in distinction from length or width.ACYB
Base Thickness:
0.080 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-17 acft; support, apu exhaust duct
MRC:
None.AJJP
Leg Thickness:
0.285 inches
MRC:
The number of holes provided.ASXK
Hole Quantity:
5
MRC:
None.CRMK
Angle:
90.0 degrees
MRC:
None.CZFG
Distance From End To Leg Along Length:
0.818 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 625
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5666 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Center projection

{lang[cimilar]} T Brackets

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى