رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Seal, rubber round section inbd-outbd flap
TXT
وصف:
Nonmetallic Special Shaped Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Hollow bulb
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 20.970 inches and 21.030 inches
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.ADVK
Cross Section Inside Diameter:
1.090 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.090 inches and 0.150 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 1.220 inches and 1.280 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
Between 2.220 inches and 2.280 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-17
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Seal is a slightly curved, itis made from 17p6p6901-97 core, p/n 17p /n17p6p6901-105 insert, p/n 17p6p6901-13 ccover, cloth polyester knitted meshper dms 2356, type 2, class 4, p/n 17p6p6901-121 stiffener cloth polyester knitted mesh per dms 2356, type 1, class 4, p/n17p6p6901-129 liner cloth polyester knitted mesh per dms 2356, type 1, class 4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass insert
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicone core
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Dms 2221, type 1, grade 50, color medium gray mfr ref single material response core
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-7575, form b, class 2 grade b resin in mil-c-9084, type 8b, class 1 cloth military specification single material response insert
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Strip
