رقم الجزء 18-125

Nonmetallic Grommet
وصف

Hardware

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 9.82 and 13.257 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
18-125
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 PG
NIIN:
001850004
NSN
رقم المخزون الوطني:
5325-00-185-0004 5325001850004
TXT
وصف:
Nonmetallic Grommet
INC
INC
رمز اسم العنصر:
33729
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.375 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.125 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.125 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.AGME
Grommet Style:
Round
MRC:
None.AGMF
Large Flange Outside Diameter:
0.875 inches
MRC:
None.AGMH
Groove Outside Diameter:
0.625 inches
MRC:
Indicates the type of design used in constructing the grommet.AGMU
Grommet Construction Type:
Solid
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Coolant resistant and oil resistant
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Mdcl
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm d2000 bg515a14b24c32e036f19z assn standard single material response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81348-mil-g-3036 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 96906-ms35489 standard (includes industry or association standards, individual manufactureer standards, etc.).

{lang[cimilar]} Nonmetallic Grommets

« Fastening Devices {lang[catalog]}
قارن الآن»
واضح | أخفى