رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Counterbore 2nd end; 1.635 in. Nom. Dia; 0.218 in. Nom. Dept
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6 both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Straight spline both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Helical first gear
MRC:
Indicates the design type of the item.APGF
Design Type:
Spur second gear
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c and 62.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
2.406 inches second gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.938 inches first gear
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.988 inches
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.125 inches between first and second gear
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.739 inches first end
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.562 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain between first and second gear
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain first end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.750 inches first end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
2.062 inches between first and second gear
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response and aisi/sae 8620 assn standard single material response
