رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Rod constructed from 1/4 in. Half round stock
TXT
وصف:
Liquid Level Gage Rod-cap
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.625 inches
MRC:
Indicates the type of cap furnished with the item.AEUX
Cap Type:
Friction
MRC:
An inside measurement from the bottom to the top of an item,in distinction from depth.AFMQ
Inside Height:
0.078 inches
MRC:
An indication of whether or not the item is furnished with a handle.AFYG
Handle:
Furnished
MRC:
The distance of separation from the end of the rod to the start of the scale graduation.BJFJ
Distance From Rod End To Scale Graduation:
1.312 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the rod end and at the start of the cap.BJFR
Rod Length From End To Cap:
8.625 inches
MRC:
A measurement taken at right angles to the length of the rod measuring portion,in distinction from thickness.BJFW
Rod Measuring Portion Width:
0.250 inches
MRC:
A measurement of the smallest dimension of the rod measuring portion,in distinction from length or width.BJFX
Rod Measuring Portion Thickness:
0.125 inches
MRC:
The length of a straight line which passes through the center of a guide plate,and terminates at the circumference.BKBC
Guide Plate Diameter:
0.656 inches
MRC:
The inscription affixed to or stamped on the scale,excluding part number.BKBF
Scale Inscription:
2/4 and 4/4
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-633, comp 1020-canceled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1020
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-633, comp 1020-canceled federal specification single material response
