رقم الجزء 1881-25B

Compression Helical Spring

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 5928.884 and 7753.156 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
1881-25b
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
011856615
NSN
رقم المخزون الوطني:
5360-01-185-6615 5360011856615
TXT
وصف:
Compression Helical Spring
INC
INC
رمز اسم العنصر:
04226
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.200 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
4.330 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Landing gear component
MRC:
None.AGEK
Spring Free Length:
21.200 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
3.135 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
12 1/2
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 1100.000 pounds and 1200.000 pounds
MRC:
None.AXJQ
Spring Solid Length:
6.250 inches
MRC:
None.AXJR
Spring Solid Outside Diameter:
4.200 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
82.260 pounds per inch
MRC:
None.AXLQ
Spring Free Outside Diameter:
4.200 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
7.500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
13-v-11cr-al, lb0170-194, north american rockwell corporation mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical

{lang[cimilar]} Compression Helical Springs

« Coil, Flat, Leaf and Wire Springs {lang[catalog]}
قارن الآن»
واضح | أخفى