رقم الجزء 196B7404

Headless Shoulder Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 270.06 and 364.581 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
196b7404
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
010546049

معلومات الجزء
Vshoulder is 0.440 in. Lg, 0.245 in. Wd, with flat cut 0.350 in. Lg, 0.161 in. Dp at shaft end, shaft is centered along width, 0.174 in. From shoulder end opposite flat, shoulder is chamfered 0.040 x 45 degrees two places entire1.060 in. Lg

NSN
رقم المخزون الوطني:
5315-01-054-6049 5315010546049
TXT
وصف:
Headless Shoulder Pin
INC
INC
رمز اسم العنصر:
16749
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.490 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.190 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.550 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
MRC:
None.ABRC
First Hole Diameter:
0.066 inches
MRC:
None.ABRD
Second Hole Diameter:
0.064 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.450 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.320 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 35.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shank end
MRC:
None.CRMG
First End Taper Angle:
146.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.000 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6395 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide film
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 military standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى